Torque ratings 125 to 450 lb.ft. Enclosure: NEMA 2, CSA 2, IP41 Construction: Cast Iron
FEATURES: INSTALL IN 4 EASY STEPS: 1. Place hub on motor shaft and tighten hub set screws. 2. Place brake on motor, guiding discs on hub. 3. Bolt brake to motor “C” face with four 5/8 inch socket head cap screws. 4. Connect coil leads and replace cover. Torque adjustable for specific applications Splined hub Class H Coil insulation Spring set, electrically released Manual release, automatic reset CSA Approved File #LR13814
FEATURES:
Copyright © 2007- Dings Company 4740 W. Electric Ave. Milwaukee, WI 53219 414-672-7830